ABS issues ballast water treatment advisory

16 Jun 2010

ABS has published a Ballast Water Treatment Advisory to assist the industry in better understanding the evolving ballast water management (BWM) and treatment regulations.

The emphasis is on providing practical guidance for shipbuilders, owners and operators on how to prepare for the selection, installation and operation of an appropriate treatment system for different ship types.

BWM has become an important environmental issue for the shipping industry in the face of an increasing number of international, regional and local regulations designed to prevent the introduction of non-indigenous invasive species into local waters and ecosystems.

To address the problem of invasive species, the IMO adopted the Ballast Water Management Convention in 2004. However, the IMO was forced to defer the implementation date as effective, viable treatment systems still needed to be developed, tested and approved. At present, the convention has yet to reach the required number of signatories for formal ratification, leaving an opening for other entities, ranging from national to State governments, to introduce parochial legislation, some of which imposes discharge standards that are much stricter than the IMO standard.

In the meantime, a burgeoning number of commercial systems have now been developed and have either been approved as meeting the IMO requirements or are in the final stages of gaining type approval. “The ballast water management regulations can be confusing for shipowners because they contain many unresolved and complex issues,” said Kirsi Tikka, ABS vice president, global technology and business development.

“What we have attempted to do with this Advisory is to gather practical information relating to both the principal regulatory developments and the types of treatment systems and not only provide this but to also highlight the many technical and design considerations that an owner should take into account for both retrofitting ballast water treatment systems to existing vessels or when specifying the design of a newbuilding.”

Even so, Tikka points out that although the IMO has now concluded that the technology and systems are available to treat ballast water, “questions remain as to how these systems will perform in actual operation, in particular those systems selected for installation on vessels such as large tankers and bulk carriers that handle very large quantities of ballast. There is still much to be learned from in-service experience.”

The 48-page Advisory is the second in a series of environmental communications from ABS. The first, the ABS Fuel Switching Advisory Notice,was released in March and addressed the issue of burning low sulphur fuel in the new Emission Control Areas (ECAs). The Ballast Water Treatment Advisory is divided into five sections covering regulatory developments, treatment technologies; considerations for system selection, including the volume of ballast water to be treated, installation and operational considerations; evaluation checklists; and a technical summary of the principal systems currently available on the market.

Copies of the Advisory are available in hard copy from ABS offices or are available for download from the ABS website within Resources, Booklets & Bulletins.

Links to related companies and recent articles ...

ABS

view more