Equipment – Page 3

  • The new LanghBW System is available with flow rates of between 100 m³/h to 1800 m³/h
    News

    Langh Tech launches UV-C BWMS system

    2021-09-21T13:47:00Z

    Langh Tech, the Finnish technology company, has diversified into the ballast water treatment market by launching a new UV-C based ballast water management system.

  • A rendering of an EcoOne™ BWMS installation aboard a bulker. (credit: Ecochlor)
    News

    IMO Type Approval issued for Ecochlor’s filterless BWMS solutions

    2021-09-13T11:47:00Z

    The Norwegian Maritime Authority has issued a Type Approval for Ecochlor’s EcoOne™ BWMS and EcoOne Hybrid™ BWMS solutions. The certification is an amendment to Ecochlor’s existing BWMS Type Approval, and certifies the systems meet the more stringent revised standards set by the BWMS Code.

  • Hans Jakob Buvarp, General Manager, Sales at Wärtsilä Gas Solutions
    News

    Wartsila Sees Wider Interest In VOC Solution For Offshore Sector

    2021-09-12T11:47:00Z

    Wärtsilä Gas Solutions is looking to extend the commercial application of its volatile organic compound (VOC) recovery system to PSVs serving crude oil tankers loading at SBMs, Sea Islands or terminals.

  • Live presentation of the 3-stage air-cooled compressors at a shipyard in Kobe, Japan, in 2008. A TEU container was specially equipped with a complete compressor installation similar to the one in an engine room. (© Sauer Compressors)
    News

    3-stage air-cooled compressors first choice for large ship engines

    2021-09-09T10:22:00Z

    The majority of seagoing vessels with an engine power of at least 20,000 kW are equipped with a 3-stage air-cooled starting-air compressor nowadays. The technology, which offers heat reduction advantages, has been installed on ships ranging from container ships to tankers and cruise vessels.

  • Alfa Laval PureSOx assembled in factory
    News

    Pleiades Shipping Agents opts for PureSOX service agreement

    2021-09-09T10:05:00Z

    When Pleiades Shipping Agents S.A. opted for an Alfa Laval Service Agreement alongside its PureSOx scrubbers, it opted for peace of mind. The EGCS system secures compliance with emission limits, while the service agreement covers connectivity, critical spares and sensor exchange and more.

  • The solution is based on ARAN's patented stationary urea production system, which has been operated successfully for three years in the power generation sector.
    News

    UREA GENERATOR OFFERS STORAGE TANK REDUCTION OF OVER 90%

    2021-09-09T09:38:00Z

    UK-based supplier of chemical bunkering systems Fluechem and Italian urea system manufacturer ARAN have teamed up to develop an onboard urea generator for the production of AUS40.

  • GEA is launching new direct drive bilgewater cleaning systems Photo: GEA
    News

    GEA unveils new direct drive bilge separator

    2021-09-08T12:43:00Z

    GEA is launching a new generation of bilge separators with integrated direct drive, bringing predicted energy savings of 30,000 kWh annually per vessel.

  • The 60m Kilo Moana is a Small Waterplane Area Twin Hull (SWATH) ship operated by the University of Hawai‘i Marine Center.
    News

    AHC technology boosts US ocean research vessel

    2021-09-01T19:22:00Z

    When the University of Hawai‘i Marine Center decided to upgrade the winch and offshore crane on its Research Vessel Kilo Moana in 2019, the new Launch and Recovery System was equipped with enhanced winch control with active heave compensation. The solution provides scientists with a safe, efficient and reliable way ...

  • Hans Petter Tanum
    News

    TMC compressors selected for LPG-fuelled carriers

    2021-08-24T15:00:00Z

    Jiangnan Shipyard (Group) Co. Ltd. has contracted TMC Compressors (TMC) to supply its marine compressed air system to four very large gas carriers the yard is building for Chinese gas carrier Tianjin Southwest Maritime.

  • The Calypso features two Liebherr CBG 360 models, offering an average throughput rate of 1,200 tonnes per hour, and a maximum outturn of 1,300tph.
    News

    Liebherr grab cranes for Oldendorff transloaders

    2021-08-23T11:52:00Z

    Liebherr has supplied a three CBG 360-type four-rope grab cranes for a transhipment vessel for Oldendorff Carriers, lifting the number of CBG 360 type cranes Liebherr has delivered to seven.

  • The Manson Construction Co. project management team and leadership at the keel laying ceremony on 2 August 2021. (credit: Manson Construction Co.)
    News

    MacGregor to supply cranes for new US-built TSHD

    2021-08-18T11:51:00Z

    MacGregor, part of Cargotec, has secured a new equipment order to supply two large, 120 ft. double telescopic service cranes and one 50 ft. telescopic stores crane for a self-propelled hopper dredger (TSHD) being built at Keppel AmFELS shipyard in Brownsville, Texas for Manson Construction Co.

  • GEA marine separator prime is available for existing OSE separators via an upgrade kit (Photo: GEA)
    News

    GEA OFFERS IMPROVED MARINE SEPARATOR EFFICIENCY

    2021-08-17T14:00:00Z

    GEA has announced the launch of a new version of its GEA marine Separator. The upgraded unit - the GEA marine Separator prime - offers improved separation efficiency and higher certified flow rates.

  • A permanent magnet shaft generator from The Switch
    News

    PERMANENT MAGNET SHAFT GENERATORS SET FOR BIGGER ROLE IN HYBRIDISATION

    2021-08-13T11:19:00Z

    Shaft generators are increasingly becoming part of ship electrification designs, and the advantages of permanent magnet systems are being recognised.

  • Hans Petter Tanum
    News

    Air deal for TMC Compressors

    2021-08-10T19:48:00Z

    Jiangnan Shipyard (Group) Co. Ltd. has contracted TMC Compressors (TMC) to supply its energy efficient marine compressed air system to six LPG carriers the yard is building for LPG shipping company Petredec.

  • The debris removal platform is being used on the Vox Amalia, a suction hopper dredger. (Photo: Van Oord)
    News

    Debut for debris removal system aboard Van Oord dredger

    2021-08-10T14:22:00Z

    The operation of an automated debris removal platform aboard a Van Oord trailing suction hopper dredger, Vox Amalia, safely removes debris that accumulates after the recovery of the vessel's draghead.

  • RINA and SGS will collaborate with Ecospray in the evaluation of the results of the first full-scale trials of the WESP system.
    News

    ITALIAN WESP EXHAUST GAS SOLUTION PREPARES FOR CRUISE VESSEL TRIAL

    2021-08-09T11:35:00Z

    EcoSpray, the Italian scrubber and clean tech supplier, is developing a new technology for the maritime market that will reduce particulate matter (PM) and SOx emissions.

  • The small-scale CO2 capture demonstration plant before installation at MHI Yokohama.
    News

    K Line to trial onboard CCS system

    2021-08-05T14:27:00Z

    Kawasaki Kisen Kaisha, Ltd. ('K' LINE) is preparing to undertake the first tests of a carbon capture and storage system onboard a vessel, following the installation of a CCS system aboard its Corona Utility bulk carrier at the Yokohama facility of project partner Mitsubishi Heavy Industries, Ltd.

  • Fluechem Director, Niall Roberts said: “We see this partnership with ARAN as a major step forward in achieving our goal of installing a fully operational system on a ship by the end of the year.”
    News

    UK supplier aims to deliver first onboard urea generator by end-2021

    2021-08-05T13:26:00Z

    ARAN SRL, an Italy-based urea production system supplier, has joined forces with Fluechem Ltd, the UK based chemical bunkering solutions supplier, to deliver what they claim is the first ship based marine Urea Generator system.

  • F110 frigate class vessel
    News

    Damen wins equipment contract

    2021-08-03T12:32:00Z

    Damen Marine Components (DMC) has been awarded a contract to provide rudders and steering gear for a Spanish shipbuilder.

  • The new WITV will have a broad range of Wärtsilä solutions delivering high performance DP Photo: Wärtsilä
    News

    Wärtsilä solutions for next-gen WTIV

    2021-07-29T12:49:00Z

    Wärtsilä has been chosen to supply an integrated propulsion and dynamic positioning thruster solution, including the engines, a Wärtsilä NOx reducer emission abatement system, as well as steerable and tunnel thrusters for a new wind turbine installation vessel (WTIV).