Chevron Marine Lubricant’s low sulphated ash trunk piston engine oil Chevron HDAX 9700 has become the first lubricant to gain time-unrestricted approval for use with MAN Energy Solutions’ four-stroke engines running on either LNG or distillate fuels (with a sulphur content of up to 0.10%).

This approval means operators can use just one lubricant, rather than having to change lubricants after a fixed period operating on one fuel or the other. Other lubricants go through validation testing on engines running either gas or distillate fuels and are granted limited approval for the other fuel.

Sanderus, Jan De Nul Group’s trailing suction hopper dredger and ultra-low emission vessel

Source: Chevron

Sanderus, Jan De Nul Group’s trailing suction hopper dredger and ultra-low emission vessel

Chevron HDAX 9700 was tested on Luxembourg dredging and offshore operator Jan De Nul Group’s trailing suction hopper dredger and ultra-low emission vessel Sanderus. The company required an engine oil with very low sulphated ash formation due to the use of a variety of low sulphur fuels (below 0.10% sulphur) with selective catalytic reduction (SCR) and diesel particulate filter (DPF), as part of its strategy to comply with European Stage V limits on nitrous oxides (NOx) and particulate matter (PM) emissions from ships.

Michel Deruyck of Jan De Nul said the company needed a low sulphated ash oil because the DPF would not handle high levels of ash deposits, but MAN Energy Solutions had not approved any low sulphated ash oils for use with distillate fuels.

Chevron HDAX 9700 is an SAE 40 engine oil that is designed to control sulphated ash accumulation in combustion chambers and exhaust system, while providing sufficient alkalinity to protect against acidic corrosion. After 6,500 running hours, the approval for unrestricted use with distillate fuels was granted. Because low sulphated ash oils are commonly used with gas engines – which are also sensitive to sulphated ash deposits – MAN Energy Solutions was also able to grant unlimited approval for the lubricant to be used when operating with LNG.

Jan De Nul will use the lubricant on further dredgers as well as jack-up vessels used in windfarm construction. Any vessels looking to comply with emission control areas – or port emission limits – by using either LNG or distillate fuels with after-treatment will also be able to use Chevron HDAX 9700.