Energy Saving Devices – Page 3
-
NewsEPS to retrofit suction sails on board oil tanker
Eastern Pacific Shipping (EPS) has announced that it has signed a deal to retrofit fixed suction sails on board an oil tanker.
-
NewsWAP IS READY TO MEET FIRST IMO CO2 REDUCTION TARGETS
Giorgio Provinciali, CTO of AYRO explains that wind assisted propulsion is capable of single-handedly providing the carbon emission reduction needed to meet the IMO’s 2030 goals, and is already available today.
-
NewsWAP first for chemical tanker
Chemical tanker operator Chemship has announced that it has has commissioned the installation of four wind-assisted propulsion on one of its vessels, marking the first such installation on a chemical tanker.
-
NewsUNIQUE NEWBUILD FOR FRENCH POLYNESIA
Re-emergent Spanish shipyard Astilleros Ria de Vigo has landed a deal to construct a combined passenger/cargo vessel tailored to service in the South Pacific.
-
NewsBAR Technologies forms partnership to support regional WindWings manufacture
BAR Technologies (BAR) has entered into a partnership agreement with Nervion Naval Offshore (Nervion), a pioneer in floating offshore wind platforms, to wholly manage and oversee the production of BAR Technologies’ WindWings® in Europe.
-
NewsWingsail Retrofit for UK Cargo Ship
UK cargo vessel operator Carisbrooke Shipping is planning to adopt a new wind-assisted propulsion solution under a joint initiative with system developer GT Green Technologies and the University of Bristol.
-
NewsOldendorff to retrofit Rotor Sails on bulker
Oldendorff has signed an agreement with Norsepower Oy to install three Norsepower Rotor Sails on board a neo-Panamax bulk carrier.
-
NewsAnemoi awarded UK grant to test and develop its 3.5m Rotor Sail design
Anemoi Marine Technologies (Anemoi) has been awarded a grant from the Clean Maritime Demonstration Competition (CMDC) Round 4. The CMDC Round 4 is part of a suite of interventions launched by the UK Shipping Office for Reducing Emissions (UK SHORE). The aim of this competition is to fund real world demonstrations, trials and feasibility studies into clean maritime technologies that reduce greenhouse gas emissions.
-
NewsFrench Ferry Upgrade Yields Big Fuel Saving
The fuel efficiency of Brittany Ferries’ 20 year-old flagship Pont-Aven is expected to improve by around 10% as a result of the incorporation of a duck tail projection at the stern.
-
NewsOdfjell opts for Italian ShaPoLi supplier
Odfjell, the wet products transportation specialist, has selected Italy-based technology developer Oceanly as the supplier of Shaft Power Limitation (ShaPoLi) technology for its fleet.
-
NewsDeltamarin joins wind-assisted RoRo design team
Deltamarin is teaming up with Louis Dreyfus Armateurs and Wuchang Shipbuilding Industry Group on the design of three wind-assisted RoRos for Airbus aircraft subassembly transportation
-
NewsPropeller coating sea trials begin
Sea trials have begun of a project to explore how effective propeller coatings are at saving energy
-
NewsLouis Dreyfus to retrofit suction sails on board chartered juice vessel
Louis Dreyfus Company has announced that it has signed a deal to retrofit fixed suction sails on board a chartered juice vessel.
-
NewsErik Thun opts for digital Dynamic Drive propulsion solution for newbuildings
Erik Thun Group has selected Berg Propulsion’s Dynamic Drive technology to optimise efficiency on board all ten of its latest newbuildings. The Swedish owner confirmed its decision after pilot installations exceeded energy efficiency gain expectations, with the integrated drive solution helping to save 10% of fuel, rising to 20% in some operational conditions.
-
NewsPayback Promise From New Bulbous Bow
Vehicle carrier and logistics specialist Wallenius Wilhelmsen has implemented a vessel upgrading project entailing the retrofit of a new form of bulbous bow. The scheme promises average fuel savings of at least 6% and a corresponding cut in the recipient ship’s CO2 emissions by 1,400t per annum.
-
NewsWind-Assisted Ro-Ros For Airbus Trade
French shipowner Louis Dreyfus Armateurs (LDA) is preparing to order a new generation of rotor sail-equipped ro-ro vessels for transatlantic service carrying Airbus cargoes.
-
NewsGrimaldi Shows Faith In Con-Ro Concept
Underscoring the Grimaldi Group’s commitment to the ro-ro multipurpose vessel type for long-haul or deep-sea liner service, the G5 newbuild generation is being phased into trade between northern Europe and West Africa.
-
NewsCHEK project releases mid-term results of interaction between energy saving devices
The EU-funded CHEK project is evaluating the interaction between multiple energy saving devices when installed on a bulk carrier and a cruise ship, and modelling as part of the project is now able to put some numbers on the gains that can be expected for the vessels.
-
NewsSteel-cutting for RoRo sailing vessel
Neoline Armateur has reached a historic milestone with the steel-cutting of its very first sailing RoRo cargo vessel
-
NewsVale to retrofit 35m Rotor Sails on board VLOC
Brazilian mining company, Vale, has announced a deal to install 35-metre Rotor Sails on board a 400,000 dwt very large ore carrier (VLOC). The agreement between Vale and wind-assisted propulsion supplier Anemoi will see five 35m tall, 5m diameter, Flettner rotors installed on the Sohar Max VLOC, which is owned by Omani shipowner Asyad.
