NavalRocha SA

Dry-Dock nr.1:  Length between gate and dockhead: 173,50m width of entrance: 22,10m depth above blocks normal high tide approx.: 9,60m depth above blocks normal low tide approx. 7,20m
Dry-Dock nr.2:  Length between gate and dock head: 104,00m width of entrance: 12,40m depth above blocks normal high tide approx.: 7,30m depth above blocks normal low tide approx.: 4,25m
Dry-Dock nr.3:  Length between gate and dock head: 65,00m width of entrance: 11,50m
Repair pier nr.2:  Vessel length: 120m draft: 5,50m

Blasting & Painting

· Hull wet-blasting or Hydro-blasting
· Tank grit-blasting
· HP washing from 200 to 700 bar.
· Painting Airless or roller.

Steelwork

· Repair and construction of steel & aluminium structures
· Plate work fabrication: ship hulls, double bottoms, ballast and other tanks
· Fabrication of pressure vessels (Class and PED compliance if required)
· Any structural and plate work on ducts, air, gas, oil, water and other liquid-tight containers
Welding:
· Extensive variety of welding solutions delivered
· Special care is observed by the QA/QC department to ensure all certifications are valid and permanent class qualifications are performed.

Mechanical Work

· Main Engines
· Repair of turbochargers and gas turbines
· Overhauling of valves
· Rudder blade repair of any type
· Fix pitch and controlled pitch propeller repairs
· Propeller shaft and intermediate shaft withdrawal and repair